Top Entry Tank Mixers and Agitators.

Euromixers Range of Top Entry Heavy Duty Tank  Mixers and Agitators offer a robust, reliable and cost-effective solution for a wide spectrum of mixing / agitating applications, mixer power shaft speed and impeller type are expertly configured by our application engineers for each application to ensure optimum performance.


Features Include:

  • Versatile modular design for Open or Closed top tanks.
  • Compact robust design.
  • SF 1.50 minimum service factor for long trouble free operation
  • High efficiency in line helical gear drives with IE3 energy efficient electric motors.
  • Ground gears for efficiency and low noise
  • Hollow shaft gearbox to ensure accurate mixer shaft alignment


Modular design provides the flexibility to meet a variety of options including Low Headroom Helical bevel gearbox where headroom is at a premium. The mixer can be mounted on support beams or a suitable structure for open tank operation or pedestal mounted for closed tanks with a stuffing box or single / double mechanical seals.

Mixer Drive

EM tank mixer gear drives are designed on a robust rigid structure enabling high bending loads, the mixer output shaft is supported by heavy duty taper roller bearings with a minimum L10 design life of 100,000 hours, gears are ground for low noise and long service life as standard. The rugged EM cast iron gearbox is fitted with double lip seal to effectively contain the gearbox lubricant under extreme operating conditions.

Shaft Design

The mixer shaft is designed to operate below first critical speed in air and is suitable for operation at all fluid levels in tank, or with an inverter at frequencies up to 50 Hz, and to run smoothly without vibration at all speeds.
Shafts can be supplied in 304 or 316 stainless steel as standard with optional plastic or rubber covered shafts and impellers.

Impeller Technology

Impellers are selected by our application engineers to meet your specific process requirements ranging from E-300 highest efficiency turbulent flow impeller which are ideal for blending, heat transfer, and solids suspension applications.

E-400 or E-315 impellers are a good choice where the viscosity changes over a wide range causing the flow regime to vary between turbulent and laminar flow and solids suspension applications, through to spiral and anchors for more viscous products.

Open Tanks

Open tank mixers and agitators can be mounted on support beams or a suitable structure over the mixing tank, the preferred mounting position is on centre in a baffled tank or vertically off centre for some applications.

Closed Tanks

Tank mixers and Agitators for closed tanks can be provided fitted with a stuffing box, Single or Double mechanical seals to suit the specific application, on standard EM models the mixer drive is removed to change the mechanical seal and offers the most economical solution on small drives.


HM model – Tank Mixers and Agitators provide the facility to change the mechanical seal cartridge without removing the drive and also offer a wider range of seal types.


Single Mechanical seals – Single Dry running balanced mechanical seal design reduces seal face wear by reducing the seal face pressure as process pressure fluctuates, the seals have self-lubricating seal faces, no external cooling or lubrication is required.

The design and material selection meet the needs of the pharmaceutical and chemical processing industries – they are excellent for low duty mixing applications and operation in vacuum conditions. The seal can be supplied with a debris well to capture wear particles, preventing the contamination of process fluid.


Double Mechanical seal cartridges – Are available in a variety of materials to meet critical and demanding pressure and temperature ratings.

Enquiries / Ordering

Please contact our application engineers for advice on your application – we will be pleased to help and quote for the most cost-effective tank mixer for your needs from our standard range of products.

Please contact our technical sales team they will be pleased to help.

Tel: 0044 (0) 161 486 5099

  • This field is for validation purposes and should be left unchanged.

Technical Reference Data

Euromixers have included a series of technical reference articles on our web site which accessed by clicking the links below or through the Technical Reference menu.


Heavy-Duty mixer brochure

Euromixers EuroScale design procedure has been developed to help relate mixing problems to the required level of agitation in a way that is simple and quantifiable.

Check the tank volume and fill level.

Start typing and press Enter to search